VO.S.F2-4/x.x (axial wall fan, model F2-4)

Intended use

Axial wall fans type VO.S.F2-4/x.x are used in the ventilation of buildings, shops, offices, cafes, warehouses, garages, halls, greenhouses, in agriculture, agriculture and industry. They are used to transfer large air flows at a relatively low pressure drop. They can be mounted on walls or panels.

Ywords about workyou

Axial fans type VO.S.F2-4/x.x can transport air mixtures, which are:

• non-aggressive
• clean or slightly dusty
• without sticky and fibrous materials
• with relative humidity up to 95%
• temperature of the transported fluid: - 20 °C (253.16 K) to + 50 °C (323.16 K)
• ambient temperature: - 20 °C (253.16 K) to + 40 °C (313.16 K)

ConstructionsYa

Standard execution

• Housing (square frame and cylinder) of steel, powder-coated
• Impeller - steel welded construction. Statically and dynamically balanced as one unit with class G6.3 in accordance with BDS ISO 21940-11
• Air direction: from motor to impeller - scheme A
• Safety net to prevent contact with rotating parts according to BDS EN ISO 13857
• Three-phase asynchronous motor 400V, 50Hz
• Degree of protection IR55
• Thermal insulation class F
• Operating mode S1
• Energy efficiency class according to Regulation (EU) 2019/1781

ATECH implementation

ATEX explosion-proof fans are designed to operate in areas with explosive atmospheres. They are designed for ventilation in explosive environments and to avoid explosions in the presence of flammable gases, conductive and non-conductive dust. These fans have been developed and certified in accordance with the Regulation on Essential Requirements and Conformity Assessment of Equipment and Protection Systems Intended for Operation in Potentially Explosive Atmospheres, implementing Directive 2014/34/EU (ATEX) setting standards for safety at work in potentially explosive atmospheres. They are used for ventilation of premises with accumulators, boiler houses, oil industries, laboratories, etc.

They are suitable for:

• mills, silos and grain warehouses
• production/warehouses for chemicals, alkyd paints, varnishes
• manufacture/warehouses for explosive products, weapons equipment and ammunition
• Refineries and fuel depots
• woodworking enterprises
• ‍indoor parking lots and garages
• battery rooms, boiler rooms, laboratories
• and other areas where there is a potentially explosive atmosphere

Fans type VO.S.F2-4/x.x Ex have explosion protection according to BDS EN 14986, BDS EN ISO 80079-36, BDS EN ISO 80079-37 and BDS EN 60079-0. Designed for installation in hazardous areas according to BDS EN 1127-1:

• for gases/vapour and mist: zone 1 (category 2G), zone 2 (category 3G)
• for combustible dust: zone 21 (category 2D), zone 22 (category 3D)

On request

• Air direction: from impeller to motor - scheme B
• Color different from the standard color range
• Stainless steel housing
• Galvanization of the housing and the protective grille
• Motors with thermal protection PTC or PTO
• Single-phase motors
• Two-speed motors
• Different voltages and frequencies

Accessoires

• Gravity flap
• Transitional frame
• Frequency converter
• Protective grille

‍